Wallets & Pocketfold Cards

Wallet Cards:
A lovely distinctive choice, classy, yet a very simple design, these will look very professional. These cards are a wallet style cards, where an insert slides into the closed wallet.

1)Are you going to want to print on the outer wallet?
If yes, this is definately possible, our wallet cards are supplied flat packed and unglued, and pre- scored, so this will allow you to add your text to the front of the wallet. It will look fantastic to personlise them. If you are intending on using a home pc printer, you should check that your printer will accept the open flat sizes. But some stores only sell pre-glued wallets, so this is something that should be considered before purchasing. Buying un-glued wallets, gives a lot more flexibilty when making and designing your wedding invites.
2)Glueing the Wallet Cards
All our wallet cards, are supplied, unglued and flat packed, you will need to be very careful when glueing them. Make sure you use either a nozzle pva glue, and apply only thin amount so as not to warp the card, or a very strong double sided tape.
3) Printing on Card Wallet Inserts
Again, you need to check your printer will accept insert sizes, this makes sense, as the inserts for wallet cards will need to slide into the outer wallet card, so you will be printing on smaller inserts than standard sizes. Generally most printers can take various size cards, including square, DL, and smaller sizes. It is normally just a case of adjusting your printer tray guides. You might want to consider using overlay paper on the card wallet insert, this will definately make printing easier. You could even print on A4 paper, then trim to size, then adhere onto the card wallet insert. This will look very professional, especially if you leave a nice border edge to show the wallet insert card.

Pocketfold Cards:
Just Stunning, if you want that extra bit of WOW factor, these are definately worth thinking about. Our stunning blank invitation pocketfold cards, are made from double sided luxury pearlescent card. This beautiful stylish pocketfold incorporates a pocket for you to add more information. Ideal for making stunning, distinctive wedding invitations. We supply our range in two ways.
A) Sold in a complete matching set. Each pocketfold wallet set contains: x1 Outer Wallet (250gsm) x2 Pearl card inserts (250gsm) x2 Ivory or white overlay paper inserts (100gsm) x1 Ivory or white envelope (100gsm) (insert overlay paper & envelope colour are perfect matching)
B) Each pocketfold wallet contains: x1 Outer Wallet (250gsm) this is supplied flat packed, and unglued, with no inserts or envelopes, thus allowing you to be creative, mix and match and make your own design inserts. Available in 4 sizes: A6, DL, Lg Square & Small Square.

1) Are you going to want to print on the outer pocketfold?
If yes, this is definately possible, as all our pocketfold cards are supplied flat packed and unglued, and pre scored, this will allow you to add your text to the front of the wallet, but great care and patience is needed. They will look fantastic if you fancy personlising them. If you are intending on using a home pc printer, you should also check that your printer will accept the open flat sizes. Consider firstly purchasing just a couple to practise on, then when you are sure you are able to put them through your printer, then head out and purchase a large quantity.
2) How to Glue Pocketfolds?
All our pocketfolds do come supplied unglued and flat packed, so you will need to be very careful when glueing them. Make sure you use either a nozzle pva glue, and apply only thin amount so as not to warp the card, or a very strong double sided tape.
3) Using & Printing on Pocketfold Card Inserts
Again, you need to check your printer will accept the insert sizes, this makes sense, as the inserts for pocketfold cards will need to slide into the outer pocketfold card, so you will be printing on smaller inserts than standard sizes. Generally most printers can take square and smaller sizes, its normally just a case of adjusting your printer tray guides. If you purchase our pocketfold set, you will be supplied with the full set which incorporates the inserts, so you need to check you can print on the finished size. If you struggle to print on the smaller size inserts, you can buy the stand alone pocketfold and consider printing on A4 paper, then trim to size, then adhere onto a card insert. This will look very professional, especially if you leave a nice border edge to show on the insert card.